Quote:
Originally Posted by missfire
Possible (unless the 18 and 19 refers to the ratio/teeth on the fixed gear on the shaft, lol) but I don't have any gearbox tools.
I think I just need faith that it'll fit and go get the bugger! Must be possible one way or another, as VDT says a lot of the drive train is virtually the same. But.. I've got two 1991 100s here and they both have different driveshaft splines, lol.
|
I started researching what i could use from my 2.8 30v quattro onto the S6 3 years ago, on S2 Forum.The resident Audi Professor who'm is actually a professor over in Canada said not much at all. I have the thread and could at a fingertip produce it here but why bother as he was wrong on that particular question, which is unusual for him.Anyway, ss far as chassis components are concerned,front and rear subframes, rear legs, wishbones etc infact the whole rear end including the Diff is identical to the S6. Only difference is the rear callipers.
The front struts sadly are not compatible for the S6.
Do your 100's have very different power levels?