Quote:
Originally Posted by 20vcqdriver
To save me some time, has anyone ever removed the cq bargraph and diff lock section in the centre console. need to take mine out to re-calibrate the voltmeter as its 0.8v under reading at present. cheers all
|
If it's the same as the Ur........
Remove ashtray, gearknob, gearlever gaiter & surround (2 screws at the rear, 1 either side & 2 under ashtray).
Unplug electric window switches
Remove heater control levers, fan switch and fascia panel (look out for the lamp holder in the back
Remove the 2 screws at the top of the centre console
Pull out the lamp from cigarette lighter and remove connector from same.
You can then remove centre console and this will reveal 2 screws holding the difflock/bar graph panel.
I might have missed something along the way but that's the main of it.
Graph is adjusted via rheostat on circuit board.
Hope this helps