View Single Post
Old 10-05-18, 12:55 PM   #17
andya
Senior Member
Classic Audi Club Member
 
andya's Avatar
 
Join Date: Aug 2010
Location: Hampshire
Posts: 1,149
Default

Well what you need are the flat ended wide angle lens hi brightness type leds. Your have to fit a 1/4 watt current limiting resistor onto each individual led. The resistor value will depend on the led's voltage and current, the supplier should give you this info. If the brightness of the led doesn't suit (too bright) you can increase the resistor value

The led voltage will be between 2 - 2.5V DC. The supply to each led needs to be +volt and earth on the switch. Thinking more about the b3 (because I simply do not know), if the existing bulbs are wired in series in the circuit, or are linked to a dimmer, it could prove to be a PITA to get this mod to work! Hopefully it will be the same as a B2!

One of the switches I put back on the car mistakenly turned out to be one of my broken buttons. I'll find it tonight and get a photo of the inside so you can all see how it was put together.

Any questions do feel free to contact me
__________________
1985 Coupe Quattro
1986 Coupe 1.8 weber carb
1987 Coupe 2.2 GT


Last edited by andya; 10-05-18 at 12:57 PM.
andya is offline   Reply With Quote