Quote:
Originally Posted by mikes2
Chop through the clip and use a grinder on the braided line metal part if you don't care about it
Remove the assembly through the hole (there should be enough flex in the hard line).
Lots of heat should be enough to undo it or use a dremel to cut a groove in the remains of the ferrule which will allow the brake nut on the hard line to be undone
|
Thanks Mike,what i did on the other side was hold the hardline with mole grips as it was worse than the one pictured and just unwound the bf goodrich hose.
Are you saying i should just heat up the hardline where the nut is to free this off?