Quote:
Originally Posted by mikes2
The other way is to run the engine for a while, switch off and pump the pedal 40 odd times to empty the bomb.
Level should be at the max or just below.
If it's above, it's overfilled.
|
I have a red light showing when i push the pedal hard in use-it then goes out
One of the possible causes may be a faulty bomb, so i think that Dave's setup will be best at this stage. Once I've figured out the issue (replaced the bomb most likely!) i will have to refill-reset the fluid.
Will report back here as usual so there's a record for the next person!