Quote:
Originally Posted by Hanuman
As a snap assumption, it seems a reasonable thought.
It may be worth pulling the relay, checking that the pins are clean, and the connections in the relay box are fairly tight.
if it starts working again, you may simply have a bad contact, or you may have a failed solder joint. I'd try and open it, and have a good look inside. Are you any good with a soldering iron?
...(edit) Alternatively, Ignition switch? I'd have to look at the circuit diagrams to remind myself,
|
All the basic checks were done before I posted Hanuman but I'm never so lucky as that!
My snap judgement is based on the fact that I had a very similar thing happen on my old T4 camper about this time last year and turned out to be nothing more than a failed relay. So fingers crossed.
I've ordered a, very cheap, guaranteed working 2nd hand replacement via ebay but it will probably only be with me Monday. Hoping I can get one a bit quicker here
Never used a soldering iron in my life