View Single Post
Old 24-11-09, 03:30 PM   #18
20vcqdriver
4 ring whore!
Classic Audi Club Member
 
20vcqdriver's Avatar
 
Join Date: Dec 2007
Location: Wirral
Posts: 3,910
Default

Quote:
Originally Posted by 20vcqdriver View Post
I had this with my 1.9 GT many years ago. Under the drivers side scuttle area is the ignition Amp with 2 push on round connectors (one I think is from the hall sender). Remove these and check for moisture/ burning and re-attach. Had this on and off for quite a while on mine and ended up changing the pins in the plugs to cure it.
The other item moisture has possibly got into is the hall sender plug on the dizzy, same again, remove clean and re-attach. This area sounds the likely issue as you have 12v on the coil and no spark and as this is a carb engine the fuel pump is mechanical off the camshaft which eliminates that area. Good luck.
Here is pic of wiring for this section, Very old so hard to make out wires but hope it helps..
Attached Images
File Type: jpg KV ign0001.jpg (25.7 KB, 9 views)
__________________

Coupe quattro 1986:-~450bhp + loooong list of mods!
Audi A7 Bi-TDI SLine Black edition 2015 mapped to produce 600lb/ft torque!
Audi S4 4.2 V8 cabriolet 2004:-
20vcqdriver is offline   Reply With Quote