Quote:
Originally Posted by Octanejunkie
Agreed. If the paint/laquer is crap then use a mild cutting polish like G3 or one of its finer derivaties to restore the finish. Then plenty of good quality wax (not yer pound shop shite or squirty stuff). You'll have a sore hand/shoulder as a good wax takes plenty of elbow grease to apply properly, but will keep the cars appearance great.
|
if it's just wax your apply then just apply it gently as wax has no cutting properties and doesn't need to be worked in. Just spread a nice even thin layer either by hand, sponge or foam applicator,in straight lines, leave for about 5-10 minutes then buff off and allow the wax to cure (curing time for a good quality carnauba wax can be anything up to 12 hours)