Classic Audi - View Single Post

Isimmo · 22-10-09, 10:30 PM

Boost test and settings for a standard WR

Run engine until normal operating temp

With pressure gauge attached, accelerate at full throttle in 2nd gear, hold vehicle speed constant with foot brake when engine reached 5500rpm...

Do not exceed for more than 10secs...

Pressure is ambient temperature dependent

At 10deg ambient it is between 10.3psi and 9.6psi for a standard engine.

22-10-09, 10:30 PM	#2
Isimmo Super Moderator Classic Audi Club Member Join Date: Jul 2007 Location: Sissix-by-the-sea Posts: 15,218	Boost test and settings for a standard WR Run engine until normal operating temp With pressure gauge attached, accelerate at full throttle in 2nd gear, hold vehicle speed constant with foot brake when engine reached 5500rpm... Do not exceed for more than 10secs... Pressure is ambient temperature dependent At 10deg ambient it is between 10.3psi and 9.6psi for a standard engine. __________________ 1985 WR quattro, 1985 20vT RallyRep, 1993 MTM ABY S2 Avant. 2010 S3 Sportback.