Quote:
Originally Posted by vag80
that sounds good as long as have over 2bar at 2000rpm your good
|
...but it's absolute minimum. My 3A iddling @ 1-1,1k [MAF potentiometr gone as usual] had something about 2 bar and 5k about 1,8 when fully warmed up. With worned out main bearings @ iddle were 1 bar.
Quote:
Originally Posted by Emjay
However when I put the heater fan on full speed the oil temp guage rises and pressure guages drop considerabley. I guess there is a voltage drop somewhere but it did freak me out last week when I put the fan on to cool me down a bit then panicked cos I though the engine was about to overheat/run out of oil  |
What shows voltmeter in that moment?
If there would be not enough oil in engine [and that's about 1 liter below minimum!], pressure would fluctuate
