[BackintheFold]

I have the receipt for a new clutch and the PO said he’d had it changed.

The issue I have is no free play that I can see/feel in the pedal.

I’ve poked around this morning, and I have a plan (for another day).

First,remove the pin from the master pushrod to the lever. Allow that to find its seating position from the clutch and slave pushing the hydraulic fluid back up the pipes.

Then somehow adjust either the length of the pushrod or the length of the pull rod to get the hole in the lever to line up with the master push road hole and replace the pin.

There doesn’t appear to be an easy way to do this. Just the least difficult!