Indeed...do the job properly, I will replace both mounts!
It's not very difficult to replace a mount, especially as I have the head off etc (to do some other work).
However it did become very difficult when one of the mount studs started slipping and I had to saw it...but the starter didn't leave me enough room to get the saw in... then I couldn't undo the starter because the downpipe was in the way...then I couldn't undo the downpipe because the exhaust joint was rusty...it was a long night but now it's done...almost...I am a car bore!
Here are a few pictures of work in progress - must finish the other 200!
5T4.jpg
5T2.jpg
5T3.jpg
5T1.jpg