View Single Post
Old 15-05-15, 03:24 PM   #1
ChrisG
Senior Member
Classic Audi Club Member
 
ChrisG's Avatar
 
Join Date: Dec 2007
Location: Bracknell, Berks.
Posts: 1,465
Default frontLH flaser not working

OK, help please !
Got the B2 Sport out Wednesday afternoon for a short drive. Got to first left hand turn and indicator flashing twice it’s normal speed. Ah bulb blown ( but it had been OK last time I put it away).
Get home.
LH front still not flashing , swapped another second hand bulb and tried a new bulb, same result no flashing.

Also checked for corrosion, looks fine but cleaned it anyway.

LH rear ok , RH side working ok.
Hazards work ok, at correct speed but not LHfront.

Checked voltage at bulb socket , zero

Traced wire back into loom near LHheadlamp, traced loom into car ( after removing glove box , radio amp etc etc !! )to where it goes up into the fuse box assembly, could check both wires ( presumably front and rear – both look like grey with black trace) . Wires seem secure into multiplug that plugs into fuse box assembly .
So ????
Break in wire , somewhere, although all but a few inches are wrapped in a loom? But it was OK when I put it away about three weeks ago.

Can’t be the flasher unit (?) as the LH rear flashes albeit at double speed, hazards and RH side are fine . Actually where is the flasher relay as I can’t find it !!

TIA
ChrisG is offline   Reply With Quote