Classic Audi - View Single Post - 1986 Mazda 323 turbo 4x4 Ex-works Group A rally car

Nigel Conniford · 24-01-09, 03:26 PM

Caliper's have been stripped down, pistons polished and the alloy filed back, new seals fitted and rebuilt, I have decieded to keep them just in the plain alloy instead of painting them.

Only 3 more to strip and rebuild

The next little job we have done is rebuild the top mounts, As you can see these bearings are totally shot to fook, theres about 4 mm of play in them, 5 hours searching the tinternet and we managed to find the same make and the same size and spec as the original ones, 10 days later and £62 lighter,these arived from the Fatherland.

24-01-09, 03:26 PM	#98
Nigel Conniford Chief Sausage Meister!! Classic Audi Club Member Join Date: Jul 2007 Posts: 3,614	Caliper's have been stripped down, pistons polished and the alloy filed back, new seals fitted and rebuilt, I have decieded to keep them just in the plain alloy instead of painting them. Only 3 more to strip and rebuild The next little job we have done is rebuild the top mounts, As you can see these bearings are totally shot to fook, theres about 4 mm of play in them, 5 hours searching the tinternet and we managed to find the same make and the same size and spec as the original ones, 10 days later and £62 lighter,these arived from the Fatherland. __________________ Horsepower is the force that determines at what speed you hit the wall, Torque is the force that determines how far you take the wall with you after you hit it.