Quote:
Originally Posted by Chrismcnaz
May I ask why you appear to be trolling me on here, do you have so little going on in your own life that you need to come and slag me off?
If i could find a new set of copper lines, i would use them. As it is i dont have the time or space at the moment to bend and make up my own set from scratch, hence why I'm looking to use the next best thing i.e. plastic braided purpose made fuel line.
If you dont have anything useful to say, please refrain from saying anything.
|
You're right about that "so little going on in your life" portion, as I currently have a prolonged vacation but my A90q is waiting for weldor to do some small things, so I have nothing to do. Also, it's good that we're both thinking similarly - it also appear to me that you're trolling the rest of us by willing to buy fuel lines made from wrong material
Otherwise I agree to Roger on all points, apart from the need of flare kit - I bought my lines in Hansaflex hydraulic parts store and they did that on one end of each line for additional fee. Actually it wouldn't be even 4-5 hours, if doing quickly, and RHD UR probably is even easier to bend the lines in place, as the biggest problem for me was the place below battery tray, where, obviously, in RHD cars is brake master cylinder located. Garage with pit and one friend in it recommended.