Quote:
Originally Posted by Coxy
my mate could do that!
He was on some Channel 4 game show program about 10 years ago when he mentioned it! I'm sure his mom and dad were sooo proud!
|
You know some perculiar people!!!!
Cheers everyone.
SPink, I'll have whatever you have mate.
I am gonna call the 90 sport and buy it! That has all the bits I need. It looks tidy enough.
I have just managed to effect a temporary repair! I have patched the wire from the failed internal resistor (in this case cyl #4) and patched it into the outputs from cyl 3 & 5. I have then connected 1 & 2 together as this levelled out the resistance of all 5 outputs to 5.6ohms - spec is 5.0 - 8.0 Ohms...Runs like a dream! The injectors are switched on thier earth by the ECU so the resistor pack merely gives a constant power feed so there's no harm in bridging them. It's no long term fix as going to put extra load on remaining ones so I'll have the bits but I can drive her home tonight!!
Spink, if you PM what you want and what bits you have I'll forward some monies - Cheers!!!!