cheers for the help guys.
Figured I am just going to stick with the current drum/disc setup so what I need are
1 - replacement drums 200mm with 108x4 PDC. Currently have 4 x 108. So what can I get these off/from
2- Front hub assembly with 108x4 PDC, current is 100x4 same as above. I will be looking to replace discs, pads calipers etc. Essentially give the brake system a clean start. It doesn't look to bad.
I also need to change the brake pressure regulator as that was an MOT advisory. Luckily I have that part new to hand
|