Quote:
Originally Posted by Jolfa
Right, I'll be hopefully getting a 90q soon, and I want to put a 7a 20v in it (can't affort a 20vt just yet).
Are the engine mounts the same between Typ89's and 85's?
Will the 85 box bolt up to a 7a?
Would I be right in thinking the 7a is essentially the same as the 6a with an extra cylinder?
What spark/fuel management do they use?
Would whatever system it uses control the spark independently if I were to go carb?
If not is there any kind of dead basic spark management off another 5 pot I can use (I'd rather not use megajolt or similar, simpler the better)?
Ta!
|
Engine mounts are the same.
Yes the typ 85 box will bolt to the 7a but you will need a UR WR flywheel and clutch and a spigot bearing for the back of the crank.
Not sure on the 6a question I would not think so.
I think it is hitachi
No you would need to run VEMS, 034, motec etc
Not that I can think of.
HTH