Dont start me..... a couple of years ago i was doing a test on a site, around the base of one of the pumps was a load of sand. Wouldn't think too much of that normally probably just a spillage but, when i took the covers off one of the meters was leaking badly on the unleaded not good. At this point you look down too see the floor is very wet and it's all spirit, I had to take the pump out of action so was showing the site manager the problem when, a car pulls up next to my cones and says the usual "is this working". No i replied, and asked him to put out his cigarette !!! so he threw it out the window ! not great when your stood in a pool of unleaded.
|