ur quattro boost setting WR engine
 

Does anybody know the exact turbo boost pressure to attain 200 bhp and what pressure in psi does the cut out come in at on the ECU. I,m led to believe that the correct value for 200 bhp is 10.4 psi .Cheers Daz

Boost test and settings for a standard WR

Run engine until normal operating temp

With pressure gauge attached, accelerate at full throttle in 2nd gear, hold vehicle speed constant with foot brake when engine reached 5500rpm...

Do not exceed for more than 10secs...

Pressure is ambient temperature dependent

At 10deg ambient it is between 10.3psi and 9.6psi for a standard engine.

Thanks for the info matey. Daz