Braided fuel lines.
 

Since im not using the 10 valver i have a set of WR fuel lines from the fuel distributor to the injectors, cold start valve and warmup regulator that i no longer need.
I have only 3 of the 5 for the injectors because the others were in a poor state being frayed badly, so they were lethal to manipulate for a start!
The remaining pipes are in good condition, no fraying evident.

I also have a full set of 200 turbo (1B) fuel lines in similar good condition.

photos below.

£25 for the WR , £30 for the 1B ( may fit MB not 100% on that). WR lines on the left.