breaking coupe 16v
 

had it up for sale and got no interest at all so started to break it (needed too much spent on it to make it worth my while keeping it, interior was minging and windscreen cracked)

http://i118.photobucket.com/albums/o...pshn9wzbli.jpg

5 stud setup £250
Front hubs/rear discs 2k mile old bearings/rear discs/abs rings

Front brakes £150 (5 STUD)
314mm discs only 2k old
As are the pagid pads and flexis

16v ace with abf cams £250
156k 2k old timing belt/plugs/dizzy cap/ thermostat etc
1 noisy tappet otherwise fit and healthy

Noisy upswept letterbox exhaust
Complete system £130

Window regulators £50 each

Auxiliary gauges with both senders
Volt meter needs new bulb £75

Wheels SOLD
V6 front bumperSOLD
3 spoke steering wheel SOLD
HeadlightsSOLD


Boot lid £75
Bonnet £50(prov sold)
Rear bumper £50

Anything else please just ask. Will happily post all items, if you can arrange postage too that's fine just let me know.

Located Newcastle upon Tyne

Hi Sam, what condition are the wing mirrors in? How much please? Thanks

Hi Sam
Do you have any of the dash wiring loom?

just realised i never got back to you @Gmac, good condition overall paints not perfect (i have some pics somewhere)
£50 delivered for the pair?

Quattromb assuming its vdo gauge wiring you need? if so its already gone sorry

BUMP

Sam it's not the vdo loom itself that I need. It is the loom and black connector plug that the vdo loom plugs into.
The black plug also joins the engine loom to the dash loom in the junction box.

im pretty sure the lad that took it chopped it, i will check this week though and get back to you

Thanks

Hi Sam do you have any b3 saloon black jacquard rear seats ?
Thanks Chris

Hi Sam,

What are the rubber bottom trims like on the doors and how much for them?

James