Classic Audi

Classic Audi (http://www.classic-audi.co.uk/forum/index.php)
-   Parts For Sale (http://www.classic-audi.co.uk/forum/forumdisplay.php?f=10)
-   -   1.8T Conversion **99% Complete** Rebuilt Engine (http://www.classic-audi.co.uk/forum/showthread.php?t=27790)

bikerjim 19-09-13 09:04 PM

1.8T Conversion **99% Complete** 225hp, Rebuilt Engine, Rebuilt Turbo, Loom etc
 
After an altercation with a wall it brings me great sadness to have to break my car :(

Up for sale is an almost complete 1.8 Turbo conversion for a B4 chassis car. This is a HASSLE FREE conversion including just about all the required parts including wiring looms etc.

http://i248.photobucket.com/albums/g...psabb5f859.jpg

Whats included:
  • Rebuilt AEB 1.8T engine (only covered around 6000 miles)
  • Rebuilt Garrett T28 Turbocharger (rebuilt using quality parts including a 360 degree thrust bearing)
  • Manifold for turbo
  • SPEC Stage 2 clutch (cost around £370)
  • Audi single mass flywheel (re-faced)
  • Complete Wiring Loom (this will be 99% plug and play, lots of time spent working this out, all dash gauges function as they should etc)
  • Later style coil conversion including 4 almost new coils and the fancy anodised coilpack adaptors from integrated engineering
  • Remapped 225 bhp ECU (done by Automark, very conservative but strong map, the engine has loads more potential and I was going to go back to have further work done)
  • Engine mounts to drop the engine straight in the car
  • All water pipes, oil pipes and sensors

All the work I have done myself using either genuine parts or high quality parts, I built this as a fit and forget setup. The engineering work on the engine was carried out by Drakes engineering in Bradford to the highest standards.

The engine has had a complete rebuild with many new part including:
  • Crank bearings
  • Big end bearings
  • New piston rings
  • Honed bores
  • Exhaust valve guides
  • All new seals and gaskets etc.

I have probably forgotten a load of stuff so please get in touch, I will PM interested parties my phone No.

The engine can be heard running and if a buyer wishes they can be involved in the removal from the car.

For all the above im asking a very fair price of £1250 this is negotiable so please get in touch.

http://i248.photobucket.com/albums/g...ps2e60c1e7.jpg
http://i248.photobucket.com/albums/g...psbb9e7565.jpg
http://i248.photobucket.com/albums/g...7-26122216.jpg
http://i248.photobucket.com/albums/g...8-08144916.jpg
http://i248.photobucket.com/albums/g...l/DSC00879.jpg

bikerjim 20-09-13 07:14 AM

Forgot to mention the exhaust! It comes with a 3" downpipe with v band fittings and of it goes to a coupe owner I will include the rest of the stainless system :tup:

styler 20-09-13 12:30 PM

sorry to hear ya had bad luck, seems a fair price considering its all there... good luck with the sale, ;)

Dan80T 20-09-13 07:14 PM

You have PM

bikerjim 20-09-13 11:48 PM

Replied :) Forgot to mention this conversion also includes the throttle cable :tup:

Dan80T 21-09-13 12:32 PM

Another PM :tup:

bikerjim 22-09-13 11:45 AM

-

timmyB4 22-09-13 06:14 PM

Quote:

Originally Posted by bikerjim (Post 326599)
Sold pending payment :)


bargain and a half . :D

Shack daddy 04-10-13 10:18 AM

Please get in touch if it doesn't sell.
Cheers

bikerjim 05-11-13 09:23 PM

Bump


All times are GMT. The time now is 02:14 AM.

Powered by vBulletin®
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Copyright ©2007-2008 Classic Audi | Site by Roadrunna