7A Stroker project 10V Big valve head near complete
OK something alittle special for someone wanting a challenge.
7a block, diesel 95.5 crank, TSR big valve head, 7a rifle drilled rods, pistons from SA machined to suit, new rings, shells, HG. This will give you roughly 200BHP in a NA set up. 2.5Lt displacemet but will look OEM monster torque. I'll include a few other bits I have kicking around to get you on your way.. £600 Please only get in touch if your serious :tup: |
:yikes:
:arf: Bargain!! Glws. :tup: |
Big valve 7A head by TSR?
:yikes: details?! :smilewinkgrin: |
No 10v TSR big valve head to keep the original look.
|
In that case calling it "7A stroker" is misleading and it should be called "NG stroker" or "KV stroker", depending on head and intake manifold used, as there are no 7A specific parts remaining ;)
|
OK keep your pants on:tup:, it was a genuine advert. As the cost of a 7a head would be £400+ nowadays I would guess anyone genuinely interested would ask unless there a chancer:moon:
|
All times are GMT. The time now is 11:21 PM. |
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2007-2008 Classic Audi | Site by Roadrunna