Polished rear lights...
 

Well, I've had a bash today....

Started with these....

The scratch
https://farm1.staticflickr.com/818/2...7d436146_c.jpg

https://farm1.staticflickr.com/812/4...69bcb081_c.jpg

And finished with these...

https://farm1.staticflickr.com/813/4...ababce77_c.jpg

https://farm1.staticflickr.com/812/4...e2be5d9d_c.jpg

https://farm1.staticflickr.com/794/4...794b8e4d_c.jpg

The scratch after cutting, polishing and waxing...
https://farm1.staticflickr.com/785/4...57736796_c.jpg

The finished rear lights...
https://farm1.staticflickr.com/812/4...e2be5d9d_c.jpg

This is a direct comparison between polished and unpolished matching pair...

https://farm1.staticflickr.com/798/4...2ff57a28_c.jpg

And this is what I used... The Evo Fine was a tornado of splatter...

https://farm1.staticflickr.com/801/4...a3c16cef_c.jpg

Came up very well :tup:

Cool :tup:

Thanks folk... To clarify a previous pm, these are all spares rather than the ones on the cars....

Nah no good,:hand: did someone not tell you Audi freaks have a way of measuring plastic depth now? :cryin:

I have discovered I can polish a turd to within a micron of being a walnut whip now... That is worrying.... And it's actually quite satisfying at the same time... regardless of depth, it's all open game now...:ihih:

Before the RallyRep came home from "the 'shop" we were admiring the "patina" of flat, faded paint with scrathes and flaking failed rattle can resprays with rust.. When suddenly I thought.. "I know, I could polish it all out, right now".... Then I just got in and ragged the arse off it... Because it loves it!

These Audi freaks, you've got to watch them,.......... usually spotted a mile of looking like one eyed loons lurching. :eek: :grr: :lol::lol::lol:

Like the second answer, authentic rustic and fun! :D

:tup:

:tup:

You've inspired me Ian....:tup:

They came up very well!

:)