Classic Audi

Classic Audi (http://www.classic-audi.co.uk/forum/index.php)
-   Parts For Sale (http://www.classic-audi.co.uk/forum/forumdisplay.php?f=10)
-   -   80/90/Coupe Speedline Wheels (http://www.classic-audi.co.uk/forum/showthread.php?t=38344)

Mellis46 22-07-18 06:16 PM

80/90/Coupe Speedline Wheels
 
Thinking of selling some Speedlines I have taking up room in my garage. Got six wheels in total, in average condition, some with tyres some without.

3x SL359 (90 20v Sport)

3x SL423 (20v Coupe)

The coupe ones look slightly deeper dish due to the different offset. I ran two SL423 on the rear and two SL359 on the front in a "staggered" set on the 90 years ago. Changed my mind about them and reverted back to Aeros.

As there isn't a full set of 4 of either type I'm not sure about value. Maybe someone needs an odd wheel as a spare or to replace something badly corroded...?

Will post pics up of them if there is interest, also got quite a few centre caps in varying condition.

Wheels would be for collection only :)

Duffy3074 23-07-18 01:38 PM

Do any of your centre caps have an immaculate badge centre?

:)

Mellis46 23-07-18 04:36 PM

I've got 8 in total but wouldn't describe any of them as immaculate, in one way or another they are all slightly to moderately scuffed, scratched or crazed. A few of them would look decent with some tlc, but wouldn't pass close scrutiny.

Not exactly selling them here am I?! :lol:

Duffy3074 24-07-18 07:19 AM

The badges are indeed fragile.

I've bought a set of these to see if they are worthwhile

https://www.ebay.co.uk/itm/4x70mm-Au...72.m2749.l2649

As, like you, I've an extensive collection of centres that look, at best, okay.

:)

mikes2 24-07-18 08:19 AM

I'm not wanting to derail a for sale thread.

@Duffy - is the centre cap you require a threaded or push type ?

@Mellis - would you be willing to post a single wheel (ET37)?

Mellis46 24-07-18 08:34 AM

Hi mike, yes i can post a single wheel, I'll take some pics of the relevant ones for you to have a look at :tup:

Duffy3074 24-07-18 10:05 AM

Quote:

Originally Posted by mikes2 (Post 447974)
I'm not wanting to derail a for sale thread.

@Duffy - is the centre cap you require a threaded or push type ?

@Mellis - would you be willing to post a single wheel (ET37)?

Its a push on one Mike

:)

Mellis46 24-07-18 06:13 PM

Here you go mike.

See what you think, these are the three with the ET37 offset. They may or may not be of interest! They have been repainted previously but need doing again as they are bubbling up round the 'rivets' and have a few chips from being stored.

One of these is slightly buckled I have noticed, in the pictures of the 2 without tyres its the **left** hand one in both. The inside edge has taken a knock by the looks of it....

The tyre is down to its wear indicators, would strip it prior to sending if you wanted that one.


https://i.imgur.com/kyLMQzo.jpg

https://i.imgur.com/EZ0ElK6.jpg

https://i.imgur.com/Sea9el0.jpg

https://i.imgur.com/kyoYZU9.jpg

Mellis46 27-07-18 09:19 AM

So mike has had one of these, effectively leaves 1 serviceable coupe wheel left, 1 not so and 3 saloon ones up for sale :)


All times are GMT. The time now is 06:42 AM.

Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2007-2008 Classic Audi | Site by Roadrunna