B2 Boot trim
 

Hi All
It's ask the audience once again,
How do I remove the black plastic trim across the full length of the boot, just below the number plate.
It houses the number plate lights.
I want to spray the boot lid and thought it would be simpler to strip the fixture and fittings rather than masking.
I've undone six 8mm nuts but am i missing anything?

P.S. I assume the Audi & quattro badges are stuck on :cryin:

The badges will come off with some care and can be refitted with double sided tape and a sharp blade to remove any unwanted tape.

Thanks Colin, I managed to get the trim off just now, a bit of sealant around the electrics and 30 years of muck