Audi 80/90/100/200 Block and Pistons Brand New
Brand new block and pistons, bore 81mm five cylinder, pistons marked " 2.2US " I do not know the engine number but the chamber in the piston crown is the same shape as the KV piston but the chamber is twice as deep ( lower compression ratio than KV), when I got the block is was all greased up but in polythene and that is why the white grease has the funny marks on it, I have had No.1 piston out for a look and all looks good, there is some slight rusting on the top of the bores but above where the top piston ring will stop, I could got the full hog and get it bored and fit KV pistons but at this time I thing it just needs moved on,
price, I dont have a clue, I have had a look on Audi Tradition :yikes::yikes::yikes: don't look there it is nuts ( have purchased a Ur quattro for less), sensible offers please. https://i.imgur.com/C1TKQXM.jpg https://i.imgur.com/EsRZ2Nf.jpg https://i.imgur.com/bWsDrOw.jpg https://i.imgur.com/5KVLRcc.jpg |
Colin, is it possibly an MB or other 10v turbo block as pistons would have lower compression than KV ?
|
You are correct about the MB being lower compression but it is not an MB block and not MB pistons and not a turbo block because no oil squiters.
|
bump
|
Very sad to see little or no interest in this block and pistons, Looking for £400 for the block and piston.
|
bump
|
All times are GMT. The time now is 02:23 PM. |
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2007-2008 Classic Audi | Site by Roadrunna